Sony KP-53HS30 Operating Instructions - Page 28
Connecting a Digital TV Receiver, Set-top box's Y, P - 1080i
View all Sony KP-53HS30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Installing and Connecting the Projection TV Connecting a Digital TV Receiver z Be sure to read the Set-top box manual. Disconnect all power sources before making any connections. 1 Using three separate component video cables, connect the Digital TV Set-top box's Y, PB and PR jacks to the projection TV. ✍ The Y, PB and PR jacks do not provide audio, so audio cables must be connected to provide sound. Component input (Y, PB and PR) is recommended for optimum picture quality. Component input is necessary to view 480p, 720p and 1080i formats. You may also use component video or S VIDEO connections. 2 Using an audio cable, connect the Digital TV Set-top box's Audio OUT jacks to the projection TV's AUDIO IN jacks. Digital TV Set-top box VMC-10HG (not supplied) PR PB Y Rear of projection TV 28 AUDIO-R (red) AUDIO-L (white) RK-74A (not supplied) ✍ You cannot record the signal from any equipment connected into the Y, PB and PR connectors. ✍ This projection TV is not compatible with digital TV receivers configured with RGB or VGA output connectors.