Sony KP-53S75 Operating Instructions - Page 15

Note: • To view scrambled channels through the cable box, select the video input which the cable box is connected to by pressing TV/ VIDEO. * If your VCR is not equipped with S VIDEO, use a VIDEO cable (yellow) instead of the S VIDEO cable. ** If you are connecting a monaural VCR, connect only the single audio output to the left (MONO) input on the projection TV. Connecting a satellite receiver (SAT) 1 Connect the cable from the satellite antenna to the satellite receiver. 2 Attach the coaxial cable from the incoming cable connection or antenna to VHF/UHF on the projection TV. 3 Using AUDIO and S VIDEO cables, connect AUDIO and S VIDEO OUT on the satellite receiver to AUDIO and S VIDEO IN on the projection TV (White-AUDIO Left, Red-AUDIO Right). Note: • To view input from the satellite receiver, select the video input which the satellite receiver is connected to by pressing TV/ VIDEO on the remote control. Disconnect all power sources before making any connections. (Rear of projection TV) AUX TO CONVERTER Cable/ Antenna 2 Satellite antenna cable 1 IN VIDEO 1 VIDEO 3 S VIDEO OUT MONITOR AUDIO (VAR/FIX) VIDEO Y VIDEO L (MONO) AUDIO R L PB (MONO) AUDIO PR R COMPONENT S VIDEO AUDIO-L AUDIO-R VHF/UHF SATELLITE IN LINE OUT RK-74A (not supplied) SAT VHF/UHF AUDIO R AUDIO L VIDEO S VIDEO IN OUT 3 YC-15V/30V (not supplied) 11