Sony KV-32XBR250 Operating Instructions - Page 9

Note about the AC Power Cord The AC power cord is attached to the rear of the TV with hooks. Use caution when removing the AC plug from its holder. Gently slide the cord in the upward direction, without removing the cord from the two lower hooks. A • VHFonly or • VHF/UHF or • Cable You can detach the cord from this hook AC Power cord Do not remove the cord from these hooks. B • VHFonly or • UHFonly or • VHF/UHF 75-ohm coaxial cable (Rear of TV) VHF/UHF 300-ohm twin lead cable (Rear of TV) VHF/UHF Antenna connector Cable and antenna If your cable provider does not feature local channels, you may find this set up convenient. CATV cable (Rear of TV) AUX (No connection "TO CONVERTER" in this case) Antenna cable TO CONVERTER VHF/UHF Select CABLE or antenna (ANT) mode by pressing ANT on the remote control. Cable or Antenna Connections Connecting directly to cable or an antenna The connection you choose will depend on the cable found in your home. Newer homes will be equipped with standard coaxial cable (see A); older homes will probably have 300 -ohm twin lead cable (see B); still other homes may contain both (see C ). 75-ohm coaxial cable C • VHF (Rear of TV) VHF/UHF and • UHF U/V mixer (not supplied) 300-ohm twin lead cable Note In order to receive channels with an antenna, you will need to turn your CABLE to OFF and perform the AUTO PROGRAM function, (see page 26). 3