Sony KV-36HS20 Primary User Manual - Page 58

Other Information Programming the Remote Control The remote control is preset to operate Sony brand video equipment. Sony Equipment Beta, ED Beta VCRs 8 mm VCR VHS VCR DVD Player Switch Position on Remote Control AV1 AV2 AV3 DVD Programmable Code Number 303 302 301 751 If you have video equipment other than Sony brand that you want to control with the TV's remote control, use the following procedures to program the remote control. ✍ The equipment must have infrared (IR) remote capability in order to be used with the remote control. MUTING POWER VCR/DVD SAT/CABLE TV SLEEP From the "Manufacturer's Codes" listed on page 52, select the threedigit code number for the manufacturer's code for your equipment. If more than one code number is listed, start with the number listed first. Use the code number to complete the following procedure. DVD MENU REC 1 Move the slide switch to the desired equipment type. 1 2 3 4 5 6 7 8 CODE SET 0 9 ENTER FUNCTION TV/VIDEO VCR/DVD SAT/CABLE TV FREEZE 2 Press CODE SET. 4 ✍ You must perform step 3 within 10 seconds of step 2, or you must start 5 again from step 2. 2 3 Press the white function button for the type of equipment you 3 want to control with the TV's remote control (VCR/DVD or SAT/CABLE). VOL MENU CH 4 Enter the three-digit manufacturer's code number. 5 Press ENTER. FAVORITES 6 To check if the code number works, aim the TV's remote control RESET AV 1 2 3 DVD RM -Y183 1 at the equipment and press the green POWER button that corresponds with that equipment. If it responds, you are done. If not, try using the other codes listed for that manufacturer. 50