Sony MDCC-2000 Operating Instructions - Page 41

Specifications Laser diode properties Material: GaAlAs Wavelength: 780 nm Emission duration: Continuous Laser output: Less than 44.6 µW (This output is the value measured at a distance of about 200 mm from the lens surface on the optical pick-up block with 7 mm aperture.) Revolutions 400 rpm to 1800 rpm (CLV) Error correction Advanced Cross Interleave Reed Solomon Code (ACIRC) Sampling frequency 44.1 kHz Coding ATRAC 3 (Adaptive TRansform Acoustic Coding 3) Modulation system EFM (Eight to Fourteen Modulation) Number of channels 2 or 4 monaural channels Frequency response 50-10,000 Hz Speaker Approx. 5.0 cm (2 inches) dia. Power output 600 mW (at 10% distortion) Input MIC: Canon XLR-3-31 type 0.44 mV (-65 dB) LINE IN 1-4: mini jack 0.49 V (-4 dB) Output EAR (minijack) for 8-300 Ω earphones LINE OUT 1,2 (minijack) 0.22 V (-11 dB) load inpedance 47 kΩ ADA (minijack) 0.22 V (-11 dB) load inpedance 10 kΩ PA (minijack) 0.22 V (-11 dB) load inpedance 47 kΩ PC (9 pin D-sub) DISPLAY (modular) Other connector CONTROL UNIT connector REMOTE jack Power requirements 12 V DC DC IN 12V jack accepts the supplied AC power adaptor for use on 120 V AC, 60 Hz Dimensions Approx. 320 x 280 x 118 mm (w/h/d) (125⁄8 x 111⁄8 x 43⁄4 inches) including projecting parts and controls Mass Approx. 4.5 kg (9 lb 15 oz) Accessories supplied AC power adaptor (1) AC power cord (1) Sony CR2032 lithium battery (1) Key (2) MiniDisc (2) US and foreign patents licensed from Dolby Laboratories. Design and specifications are subject to change without notice. Optional accessories Foot control unit FS-85 Dynamic microphone F-BM7 MiniDisc (10 included) 10MDW74CC Your dealer may not handle some of the above listed optional accessories. Please ask the dealer for detailed information about the optional accessories. Additional Information 41