Sony MEX BT2500 Operating Instructions - Page 11
Bluetooth operations, Pairing - bluetooth pairing
UPC - 027242710320
View all Sony MEX BT2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Tuning automatically 1 Select the band, then press (SEEK) -/+ to search for the station. Scanning stops when the unit receives a station. Repeat this procedure until the desired station is received. Tip If you know the frequency of the station you want to listen to, press and hold (SEEK) -/+ to locate the approximate frequency, then press (SEEK) -/+ repeatedly to fine adjust to the desired frequency (manual tuning). Bluetooth function Bluetooth operations To use the Bluetooth function, the following procedure is necessary. 1 Pairing: When connecting Bluetooth devices for the first time, mutual registration is required. This is called "pairing." This registration (pairing) is required only for the first time, as this unit and the other devices will recognize each other automatically from the next time. You can pair up to 8 devices. (Depending on the device, you may need to input a passcode for each connection.) 2 Connection Sometimes pairing allows to connect automatically. To use the device after pairing is made, start the connection. 3 Handsfree talk/Music streaming You can call a cellular phone and listen to music when the connection is made. Pairing First, register ("pair") a Bluetooth device (cellular phone, etc.) and this unit with each other. You can pair up to 8 devices. Once pairing is established, there is no need for pairing again. 1 Press (OFF). Be sure the clock or the demonstration appears. The Auto off function is set, if the unit is turned off and the display disappears, press and hold (OFF) to set the power on. 2 Place the Bluetooth device within 1 m (3 ft) of this unit. 3 Press and hold (EQ/BLUETOOTH) until " " flashes (about 7 seconds). The unit enters pairing standby mode. flashing continue to next page t 11