Sony MEX BT2500 Operating Instructions - Page 6
Setting the clock, Adjusting the volume level of, each device, Detaching the front panel - caution alarm
UPC - 027242710320
View all Sony MEX BT2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Setting the clock The clock uses a 12-hour digital indication. 1 Press and hold the select button. The setup display appears. 2 Press the select button repeatedly until "CLOCK-ADJ" appears. 3 Press (SEEK) +. The hour indication flashes. 4 Rotate the select button to set the hour and minute. To move the digital indication, press (DSPL). 5 Press the select button. The setup is complete and the clock starts. To display the clock, press (DSPL). Press (DSPL) again to return to the previous display. With the card remote commander In step 4, to set the hour and minute, press M or m. Adjusting the volume level of each device When connecting to a portable audio device via Bluetooth connection or AUX input jack, we recommend adjusting the volume level of the connected device, or adjusting the volume level for each connected device in the setup menu on this unit. See "Adjusting the volume level" (page 14) for Bluetooth device, and "Adjusting the volume level" (page 16) for a device connected to AUX. Detaching the front panel You can detach the front panel of this unit to prevent theft. Caution alarm If you turn the ignition switch to the OFF position without detaching the front panel, the caution alarm will sound for a few seconds. The alarm will only sound if the built-in amplifier is used. 1 Press (OFF). The unit is turned off. 2 Press , then pull it off towards you. Notes • Do not drop or put excessive pressure on the front panel and display window. • Do not subject the front panel to heat/high temperature or moisture. Avoid leaving it in a parked car or on a dashboard/rear tray. 6