Sony MEX-BT3800U Operating Instructions - Page 26
Customizing the equalizer curve - EQ3, Adjusting setup items - SET - external mic
UPC - 027242773967
View all Sony MEX-BT3800U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Customizing the equalizer curve - EQ3 "CUSTOM" of EQ3 allows you to make your own equalizer settings. 1 Select a source, then press the select button repeatedly to select "EQ3." 2 Rotate the control dial to select "CUSTOM." 3 Press the select button repeatedly until "LOW," "MID" or "HI" appears. 4 Rotate the control dial to adjust the selected item. The volume level is adjustable in 1 dB steps, from -10 dB to +10 dB. Repeat steps 3 and 4 to adjust the equalizer curve. To restore the factory-set equalizer curve, press and hold the select button before the setting is complete. 5 Press (BACK). The setting is complete and the display returns to normal reception/play mode. Tip Other equalizer types are also adjustable. Adjusting setup items - SET 1 Press and hold the select button. The setup display appears. 2 Press the select button repeatedly until the desired item appears. 3 Rotate the control dial to select the setting (example "ON" or "OFF"). 4 Press and hold the select button. The setup is complete and the display returns to normal reception/play mode. Note Displayed items will differ, depending on the source and setting. The following items can be set (follow the page reference for details): CLOCK-ADJ (Clock Adjust) (page 7) CT (Clock Time) Activates the CT function: "ON," "OFF" (page 17). BEEP Activates the beep sound: "ON," "OFF." 26 AUX-A*1 (AUX Audio) Activates the AUX source display: "ON," "OFF" (page 27). A.OFF (Auto Off) Shuts off automatically after a desired time when the unit is turned off: "NO," "30S (Seconds)," "30M (Minutes)," "60M (Minutes)." MIC*1 (Microphone) - "EXT": to automatically switch to the external microphone when it is connected. - "INT": to select only the internal microphone. DEMO (Demonstration) Activates the demonstration: "ON," "OFF." DIM (Dimmer) Changes the display brightness: "ON," "OFF." A.SCRL (Auto Scroll) Scrolls long items automatically: "ON," "OFF." LOCAL (Local Seek Mode) - "ON": to only tune into stations with stronger signals. - "OFF": to tune normal reception. MONO*2 (Monaural Mode) Selects monaural reception mode to improve poor FM reception: "ON," "OFF." Z.TIME (Zappin Time) Selects the playback time for the ZAPPIN function. - "Z.TIME-1 (about 6 seconds)," "Z.TIME-2 (about 9 seconds)," "Z.TIME-3 (about 30 seconds)." LPF (Low Pass Filter) Selects the subwoofer cut-off frequency: "OFF," "80Hz," "100Hz," "120Hz," "140Hz," "160Hz." LPF NORM/REV (Low Pass Filter Normal/ Reverse) Selects the subwoofer phase: "NORM," "REV." HPF (High Pass Filter) Selects the front/rear speaker cut-off frequency: "OFF," "80Hz," "100Hz," "120Hz," "140Hz," "160Hz." LOUD (Loudness) Reinforces bass and treble for clear sound at low volume levels: "ON," "OFF." DM+ Activates the DM+ function: "ON,""OFF." BTM (page 16) BT INIT*1 (Bluetooth Initialize) (page 25) *1 When the unit is turned off. *2 When FM is received.