Sony MEX-R1 Operating Instructions - Page 33
Radio, Storing automatically, - BTM, Storing manually, Receiving the stored stations
View all Sony MEX-R1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Radio Caution When tuning in stations while driving, use Best Tuning Memory (BTM) to prevent an accident. MODE SRC ENTER LIST SYSTEM MENU Number buttons ATT DVD OFF SRC MODE TOP MENU + SOUND SETUP SYSTEM LI ST ENTER - MENU PICTURE Z × Z EQ DSO AUDIO SUBTITLE ANGLE MENU EQ7 1 2 4 5 7 8 CLEAR 0 3 6 + 9 VOL DSPL - ./> M/m Storing automatically - BTM 1 Press (SRC) (SOURCE) repeatedly until "TUNER" appears. To change the band, press (MODE) repeatedly. You can select from FM1, FM2, FM3, AM1 or AM2. 2 Press (SYSTEM MENU), then press M/m repeatedly until "BTM" appears. 3 Press (ENTER). The unit stores stations in order of frequency on the number buttons ((1) to (6)). A beep sounds when a setting is stored. Storing manually While receiving the station that you want to store, press and hold a number button ((1) to (6)) until "MEM" appears. The number button indication appears in the display. Note If you try to store another station on the same number button, the previous stored station will be replaced. Receiving the stored stations Select the band, then press a number button ((1) to (6)) or M/m. Tuning automatically Select the band, then press ./> to search for the station. Scanning stops when the unit receives a station. Repeat this procedure until the desired station is received. Tip If you know the frequency of the station you want to listen to, press and hold ./> to locate the approximate frequency, then press ./> repeatedly to fine adjust to the desired frequency (manual tuning). With the main unit To search for the station, press (SEEK) +/-. Receiving a station through a list - list-up You can list up the frequency. 1 Select the band, then press (LIST). The frequency appears. 2 Press M/m repeatedly until the desired station appears. 3 Press (ENTER) to receive the station. 33