Sony MHC-771 Operating Instructions - Page 30

Specifications For the U.S. model AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: With 6 ohm loads, both channels driven, from 40 - 20,000 Hz; rated 50 watts per channel minimum RMS power, with no more than 0.9 % total harmonic distortion from 250 milliwatts to rated output. CD player section System Compact disc and digital audio system Laser Semiconductor laser (λ=780 nm) Emission duration: continuous Laser output Max. 44.6 µW* * This output is the value measured at a distance of 200 mm from the objective lens surface on the Optical Pick-up Block with 7 mm aperture. Frequency response 2 Hz - 20 kHz (±0.5 dB) Wavelength 780 - 790 nm Signal-to-noise ratio More than 90 dB Dynamic range More than 90 dB Tuner section FM stereo, FM/AM superheterodyne tuner FM tuner section Tuning range 87.5 - 108.0 MHz (100 kHz step) Antenna FM lead antenna Antenna terminals 75 ohm unbalanced Intermediate frequency 10.7 MHz AM tuner section Tuning range 531 - 1,710 kHz (with the tuning interval set at 9 kHz) 530 - 1,710 kHz (with the tuning interval set at 10 kHz) Antenna AM loop antenna, External antenna terminals Intermediate frequency 450 kHz Amplifier section Continuous RMS power output U.S. model: 50 W + 50 W (6 ohms at 40 - 20,000Hz, 0.8 % THD) Canadian model: 50 W + 50 W (8 ohms at 1 kHz, 5% THD) Inputs 100 CD/VIDEO IN (phono jacks): voltage 450 mV, impedance 47 kilohms MIX MIC (phone jacks): sensitivity 1 mV, impedance 10 kilohms Outputs 100 CD/VIDEO OUT (phono jacks): voltage 250 mV impedance 1 kilohms PHONES (stereo phone jack): accepts headphones of 8 ohms or more. SPEAKER: accepts impedance of 6 to 16 ohms. SURROUND SPEAKER: accepts impedance of 16 ohms. SUPER WOOFER: Voltage 1 V, impedance 1 kilo ohms. Tape player section Recording system 4-track 2-channel stereo Frequency response (DOLBY NR OFF) 40 - 13,000 Hz (±3 dB), using Sony TYPE I cassette 40 - 14,000 Hz (±3 dB), using Sony TYPE II cassette Wow and flutter ±0.15% W.Peak (IEC) 0.1% W.RMS (NAB) ±0.2% W.Peak (DIN) Speaker SS-H771 Speaker system 3-way speaker system Speaker units Woofer: 15 cm, cone type Tweeter: 5 cm, cone type Super Tweeter: 2 cm, dome type Eucloser type Bass reflex Rated impedance 6 ohms Dimensions Approx. 205 × 325 × 275 mm (8 1/8 × 12 7/8 × 10 7/8 in) (w/h/d) Mass Approx. 4 kg (8 lb 13 oz) net per speaker Supplied accessories AM loop antenna (1) Remote RM-SD50 (1) Sony SUM-3 (NS) batteries (2) FM lead antenna (1) Speaker cords (2) General Power requirements 120 V AC, 60 Hz Power consumption U.S. model: 110 W Canadian model: 150 W Dimensions Approx. 280 x 325 x 360 mm (11 1/8 x 12 7/8 x 14 1/4 in) (w/h/d) incl. projecting parts and controls Mass Approx. 8.2 kg (18 lb 1 oz) Optional accessory Surround speaker SS-SR10P Speaker system Full range Speaker units 10 cm dia., cone type Enclosure type Closed Rated impedance 16 ohms Dimensions Mass Approx. 125 x 160 x 110 mm (5 x 63/8 x 43/8 in) (w/h/d/) Approx. 700 g (1 lb 8 oz) per speaker EN Design and specifications are subject to change without notice. 29 For Your Information