Sony MHC-BX5 Operating Instructions - Page 11

To Do this Stop play Press x. Pause Press X. Press again to resume play. Select a track During play or pause, press > (to go forward) or . (to go back). Find a point in a track Turn SHUTTLE clockwise (to go forward) or counterclockwise (to go back) until it clicks and hold. Release it when you reach the desired point (or press and hold down M or m on the remote). Select a CD in stop mode Press a DISC 1~3 button or DISC SKIP EX-CHANGE (or D. SKIP on the remote). Play only the CD you have selected Press PLAY MODE repeatedly until "CONTINUE 1 DISC" or "SHUFFLE 1 DISC" appears. Play all CDs Press PLAY MODE repeatedly until "CONTINUE ALL DISCS" or "SHUFFLE ALL DISCS" appears. Remove the CD Press Z OPEN/CLOSE. Exchange other Press DISC SKIP EX-CHANGE. CDs while playing Adjust the volume Turn VOLUME (or press VOL +/- on the remote). Tips • You can switch from another source to the CD player and start playing a CD just by pressing the DISC 1~3 buttons (Automatic Source Selection). • If there is no CD in the player, "CD NO DISC" appears in the display. • When a disc tray holding a CD is selected (or the CD in the disc tray is playing) the disc pointer indicator lights. When a disc tray holding a CD is not selected, the disc presence indicator lights, but the disc pointer indicator does not light. When all disc trays are empty, both the disc presence indicator and disc pointer indicator light. Note When a tray has not been detected by the unit, the disc pointer indicator may light even though there is no disc on the tray. Basic Operations 11