Sony MHC-BX5 Operating Instructions - Page 25
Selecting tape length, automatically, Tape Select Edit
View all Sony MHC-BX5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
9 Repeat steps 5 and 6 for tracks from the same disc or steps 4 to 6 for tracks from another disc to program the remaining tracks to be recorded on side B. 10 Press CD SYNC HI-DUB. Deck B stands by for recording and the CD player stands by for playback. REC PAUSE/START button blinks. 11 Press DIRECTION repeatedly to select g to record on one side. Select j (or RELAY) to record on both sides. 12 Press REC PAUSE/START. Recording starts. To stop recording Press x. To check the order Press CHECK on the remote repeatedly. After the last track, "CHECK END" appears. To cancel Program Edit Press PLAY MODE repeatedly until "PGM" or "SHUFFLE" disappears from the display. Tip When you want to reduce the hiss noise in low-level high-frequency signals, press DOLBY NR so that "DOLBY NR" appears after pressing CD SYNC HI DUB (MHC-BX9/DX9 only). Selecting tape length automatically -Tape Select Edit You can check the most suitable tape length for recording a CD. Do the following steps before recording. 1 Place a CD. 2 Press CD. 3 Press EDIT once, so that "EDIT" flashes. The required tape length for the currently selected CD appears, followed by the total playing time for side A and side B respectively. Note You cannot use Tape Select Edit for discs containing over 20 tracks. 25