Sony MHC-GX25 Operating Instructions - Page 12
Creating your own program, — Program Play - cd tray will not open
View all Sony MHC-GX25 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Creating your own program - Program Play You can make a program of up to 25 steps from all the discs in the order you want to play them. You can synchro record the programmed tracks onto a cassette tape (page 17). MP3 audio tracks cannot be played on MHC-GX25 and MHC-RG220 (except for European and Russian models). Using the display window 1 Press CD. 2 Press PLAY MODE in stop mode repeatedly until "PGM" appears. 3 Press D.SKIP (or DISC 1 - 3 or DISC SKIP/EX-CHANGE on the unit) to select a disc. To program all the tracks on a disc at once, proceed to step 5 with "AL" displayed. 4 Press . or > repeatedly until the desired track number appears. When programming an MP3, press ALBUM - or + to select album, then press . or > repeatedly until the desired track number appears. Disc tray number Selected track number 6 Program additional discs or tracks. To program Repeat steps Other discs 3 and 5 Other tracks on the 4 and 5 same disc Other tracks on other discs 3 to 5 7 Press N. Program Play starts. Other operations To Cancel Program Play Clear a track from the end Do this Press PLAY MODE in stop mode repeatedly until "PGM" disappears. Press CLEAR in stop mode. Tips • The program you made remains after Program Play finishes. To play the same program again, press CD, then press N. However, the program is cleared when you open the disc tray. appears when the total CD program time exceeds 100 minutes, or when you select a CD track whose number is 21 or over, or when you select an MP3 audio track. Total playing time (including selected track) 5 Press ENTER. The track is programmed. The program step number appears, followed by the total playing time. 12GB