Sony MHC-GX25 Operating Instructions - Page 28

Messages, Tape deck, If the system still does not, operate properly after performing

Page 28 highlights

A stereo FM program cannot be received in stereo. • Press FM MODE (or STEREO/MONO for MHCGX25 and MHC-RG220 (except for European and Russian models)) until "MONO" disappears. Tape deck The tape does not record or play, or there is a decrease in sound level. • The heads are dirty. Clean them (page 30). • The record/playback heads are magnetised. Demagnetise them (page 30). The tape does not erase completely. • The record/playback heads are magnetised. Demagnetise them (page 30). There is excessive wow or flutter, or the sound drops out. • The capstans or pinch rollers are dirty. Clean them (page 30). Noise increases or the high frequencies are erased. • The record/playback heads are magnetised. Demagnetise them (page 30). The tape does not record. • No cassette is loaded. Load a cassette. • The tab has been removed from the cassette. Cover the broken tab with adhesive tape (page 30). • The tape has wound to the end. Messages One of the following messages may appear or flash in the display during operation. CD/MP3 NO DISC There is no disc in the player. OVER You have reached the end of the disc while pressing M during playback or pause. If the system still does not operate properly after performing the above measures, reset the system as follows: 1 Disconnect the power cord. 2 Reconnect the power cord. 3 Press x, GROOVE and ?/1 at the same time. 4 Press ?/1 to turn on the system. The system is reset to the factory settings. You should set the settings you made, such as the preset stations, clock, and timer. 28GB

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

28
GB
A stereo FM program cannot be received in
stereo.
Press FM MODE (or STEREO/MONO for MHC-
GX25 and MHC-RG220 (except for European
and Russian models)) until “MONO” disappears.
Tape deck
The tape does not record or play, or there is a
decrease in sound level.
The heads are dirty. Clean them (page 30).
The record/playback heads are magnetised.
Demagnetise them (page 30).
The tape does not erase completely.
The record/playback heads are magnetised.
Demagnetise them (page 30).
There is excessive wow or flutter, or the sound
drops out.
The capstans or pinch rollers are dirty. Clean them
(page 30).
Noise increases or the high frequencies are
erased.
The record/playback heads are magnetised.
Demagnetise them (page 30).
The tape does not record.
No cassette is loaded. Load a cassette.
The tab has been removed from the cassette.
Cover the broken tab with adhesive tape
(page 30).
The tape has wound to the end.
If the system still does not
operate properly after performing
the above measures, reset the
system as follows:
1
Disconnect the power cord.
2
Reconnect the power cord.
3
Press
x
, GROOVE and
?/1
at the same
time.
4
Press
?/1
to turn on the system.
The system is reset to the factory settings. You
should set the settings you made, such as the
preset stations, clock, and timer.
One of the following messages may appear or
flash in the display during operation.
CD/MP3
NO DISC
There is no disc in the player.
OVER
You have reached the end of the disc while pressing
M
during playback or pause.
Messages