Sony MHC-GX8000 Operating Instructions (primary manual) - Page 15

Set the time to stop recording following, the above procedure., Insert a recordable tape into deck B

Page 15 highlights

Tape 5 Set the time to stop recording following the above procedure. The start time appears, followed by the stop time, the preset radio station to be recorded (e.g., "TUNER FM 5"), then the original display appears. 6 Insert a recordable tape into deck B. Make sure the tape is in forward direction. 7 Turn off the power. When the recording starts, the volume level is set to the minimum. To Check the setting Change the setting Cancel timer operation Do this Press CLOCK/TIMER SELECT on the remote and press V or v repeatedly to select "REC SEL". Then, press ENTER. Start from step 1. Press CLOCK/TIMER SELECT on the remote and press V or v repeatedly to select "TIMER OFF". Then, press ENTER. Notes • If the power is on at the preset time, the Timer recording does not work. • The power turns on 15 seconds before the preset time. 15GB MHC-RG77 4-238-409-11 (2)

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28

15
GB
MHC-RG77
4-238-409-
11
(2)
Tape
5
Set the time to stop recording following
the above procedure.
The start time appears, followed by the stop
time, the preset radio station to be recorded
(e.g.,
TUNER FM 5
), then the original
display appears.
6
Insert a recordable tape into deck B.
Make sure the tape is in forward direction.
7
Turn off the power.
When the recording starts, the volume level
is set to the minimum.
To
Check the setting
Change the setting
Cancel timer
operation
Notes
If the power is on at the preset time, the Timer
recording does not work.
The power turns on 15 seconds before the preset
time.
Do this
Press CLOCK/TIMER
SELECT on the remote and
press
V
or
v
repeatedly to
select
REC SEL
. Then, press
ENTER.
Start from step 1.
Press CLOCK/TIMER
SELECT on the remote and
press
V
or
v
repeatedly to
select
TIMER OFF
. Then,
press ENTER.