Sony MHC-V21 Operating Instructions - Page 26

To erase the pairing information You can erase all pairing information by resetting the system. See "Resetting the system" (page 50). Note After you reset the system, it may not be able to connect with your iPhone/iPod. In this case, delete the pairing information of the system on your iPhone/iPod, then perform the pairing operation again. Listening to music on a BLUETOOTH device You can listen to music on the BLUETOOTH device and control the playback using the buttons on the unit or the remote control. Check the following before playing music: --The BLUETOOTH function of the BLUETOOTH device is turned on. --Pairing has been completed (page 25). Once the system and the BLUETOOTH device are connected, you can control playback by pressing and /. 1 Press BLUETOOTH on the unit to select the BLUETOOTH function. "BLUETOOTH" appears on the display. 2 Establish connection with the BLUETOOTH device. Press BLUETOOTH on the unit to connect to the last connected BLUETOOTH device. Perform the BLUETOOTH connection from the BLUETOOTH device if the device is not connected. Once the connection is established, the BLUETOOTH device name appears on the display. 3 Press  to start playback. Depending on the BLUETOOTH device, --you may need to press  twice. --you may need to start playing an audio source on the BLUETOOTH device. 4 Adjust the volume. Adjust the volume of the BLUETOOTH device first. If the volume level is still too low, adjust the volume level on the system. Note When the system is not connected to any BLUETOOTH device, the system will connect to the last connected BLUETOOTH device automatically when you press BLUETOOTH or  on the unit. To terminate the BLUETOOTH connection Press BLUETOOTH on the unit. "BT AUDIO" appears on the display. Depending on the BLUETOOTH device, the BLUETOOTH connection may be terminated automatically when you stop playback. 26US