Sony MHC-V21 Operating Instructions - Page 49
Tuner, BLUETOOTH device, the connection is lost.
View all Sony MHC-V21 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Files cannot be played back. •• USB devices formatted with file systems other than FAT16 or FAT32 are unsupported.* •• If you use a partitioned USB device, only files on the first partition can be played back. * This system supports FAT16 and FAT32, but some USB devices may not support all of these FAT. For details, refer to the operating instructions of each USB device or contact the manufacturer. Tuner* There is severe hum or noise, or stations cannot be received. •• Connect the antenna properly. •• Change antenna location and its orientation to obtain good reception. •• Turn off nearby electrical equipment. * Radio may not be received depending on the radio wave conditions or the housing environment in your area. BLUETOOTH device Pairing cannot be performed. •• Move the BLUETOOTH device closer to the system. •• Pairing may not be possible if other BLUETOOTH devices are present around the system. In this case, turn off the other BLUETOOTH devices. •• Make sure to enter the correct passkey when selecting the system's name (this system) on the BLUETOOTH device. The BLUETOOTH device cannot detect the system, or "BT OFF" appears on the display. •• Set the BLUETOOTH signal to "BT ON" (page 29). Connection is not possible. •• The BLUETOOTH device you attempted to connect does not support the A2DP profile, and cannot be connected with the system. •• Enable the BLUETOOTH function of the BLUETOOTH device. •• Establish a connection from the BLUETOOTH device. •• The pairing registration information has been erased. Perform the pairing operation again. The sound skips or fluctuates, or the connection is lost. •• The system and the BLUETOOTH device are too far apart. •• If there are obstacles between the system and your BLUETOOTH device, remove or avoid the obstacles. •• If there is equipment that generates electromagnetic radiation, such as a wireless LAN, other BLUETOOTH device, or a microwave oven nearby, move them away. The sound of your BLUETOOTH device cannot be heard on this system. •• Increase the volume on your BLUETOOTH device first, then adjust the volume using VOL +/-. There is severe hum, noise, or distorted sound. •• If there are obstacles between the system and your BLUETOOTH device, remove or avoid the obstacles. 49US Additional Information