Sony MHC-V818 Operation Guide - Page 6

Step 1: Hooking up the system (continued) 4 Set SYSTEM SELECT (color system) to the appropriate position (PAL or NTSC), according to your TV. NTSC PAL AUTO SYSTEM SELECT If your TV automatically changes the color system according to the input signal: The factory setting (AUTO) automatically changes the color system of the video output according to the color system of the current VIDEO CD. If the color system of your TV is NTSC: Set SYSTEM SELECT to NTSC. Pictures recorded in the PAL color system will be stretched vertically and will be displayed with the upper and lower parts of the picture cut off. If the color system of your TV is PAL: Set SYSTEM SELECT to PAL. Pictures recorded in the NTSC color system will be stretched horizontally and will be displayed with the upper and lower parts of the screen masked in black. Note Be sure to turn off the system before changing the SYSTEM SELECT setting. 120V 5 Set VOLTAGE SELECTOR to position of your local power line voltage (for models with a voltage selector). VOLTAGE SELECTOR 230 - 240V 6 Connect the power cord to a wall outlet. Demo mode appears in the display. 7 Deactivate the demo mode by pressing DEMO when the system power is turned off. The demo mode is also deactivated when you set the time. To attach the front speaker pads Attach the supplied front speaker pads to the bottom of the speakers to stabilize the speakers and prevent them from slipping. 220V 6