Sony MHC-V818 Operation Guide - Page 9

Step 3: Presetting radio stations You can preset the following number of stations: - 2 band model: 20 for FM, 10 for AM. - 3 band model: 20 for FM, 10 for MW, and 10 for SW. (Power) 4 5 13 2 Press and hold + or - until the frequency indication starts to change, then release. Scanning stops when the system tunes in a station. "TUNED" and "STEREO" (for a stereo program) appear. MONO TUNED STEREO ALL DISCS VOLUME kHz MHz ß 3 Press TUNER MEMORY. A preset number appears in the display. Preset number 2 1 Press TUNER/BAND repeatedly until the band you want appears in the display. The bands you can receive vary depending on the model you purchased. Be sure to check which bands you can receive. Every time you press this button, the band changes as follows: 2 band model: FM ˜ AM 3 band model: FM n MW n SW ALL DISCS VOLUME ß 4 Turn the jog dial to select the preset number you want. 5 Press ENTER/NEXT. The station is stored. 6 Repeat steps 1 to 5 to store other stations. To tune in a station with a weak signal Press + or - repeatedly in step 2 to tune in the station manually. To change the preset number Start over from step 1. continued n 9