Sony MKS-R1630 Operating Instructions - Page 34

Warning messages Message (MKS-R3210/R1620) Load... DCinEr TimeEr L1Link L1Dhcp L1ComE L1Pant L2Link L2Dhcp L2ComE L2Pant Message (MKS-R1630) Description Solution Loading... Display does not change: The required information from the system controller cannot be loaded Check the network settings and connections. DCin Lost A power supply is not connected to the DC Check the DC power supply. IN connector. Time Sync Err A time synchronization error occurred. Check the network settings and connections. LAN1 Linkdown The LAN1 link is down. Check the network settings and connections. LAN1 DHCP Srv Lost The lease file of LAN1 does not exist. Check the network settings and connections. LAN1 Comm Err The LAN1 system controller is in Disconnected or Connecting state. Check the network settings and connections. LAN1 Parent Lost Could not connect to the LAN1 parent device when panel link is set. Check the network and device connections and settings. LAN2 Linkdown Non-redundancy mode: This error does not Check the network settings and connections. occur. Redundancy mode: The LAN2 link is down. LAN2 DHCP Srv Lost Non-redundancy mode: This error does not occur. Redundancy mode: The LAN2 lease file does not exist. Check the network settings and connections. LAN2 Comm Err Non-redundancy mode: This error does not occur. Redundancy mode: The LAN2 system controller is in Disconnected or Connecting state. Check the network settings and connections. LAN2 Parent Lost Non-redundancy mode: This error does not occur. Redundancy mode: Could not connect to the LAN2 parent device when panel link is set. Check the network and device connections and settings. If an error persists after taking the appropriate actions above, contact your Sony service or sales representative. 34