Sony MV-900SDS Operating Instructions (primary manual) - Page 14
Selecting the input source, Selecting the color system, Press, to turn on the player. - car dvd player
View all Sony MV-900SDS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Selecting the input source You can select the input source for the monitor. DISPLAY POWER 12 45 78 TOP MENU SEARCH 3 CLEAR 6 90 SUBTITLE MENU ENTER ANGLE AUDIO POWER Selecting the color system The player detects the color system of the input video signal (NTSC or PAL) and changes the setting automatically (auto mode). Do the steps below to change the color system setting for the input video signal manually. VOL INPUT SETUP INPUT 1 Press (POWER) to turn on the player. The current input source (DVD) appears on the screen for 5 seconds. 2 Press (INPUT) repeatedly to select the input source. Each time you press (INPUT), the indication changes as follows: DVD y VIDEO Be sure to change the input source setting to "DVD" to play a disc or "Memory Stick" with this player. Note When you play a "Memory Stick," set the input source to "DVD." Tip If your car has no ACC (accessory) position on the ignition key switch and you set the POWER SELECT switch to the B position, the player does not turn on by pressing (POWER) on the card remote commander (page 6). POWER VOL +/- 1 Press (POWER) to turn on the player. The current input channel (DVD) appears on the screen for 5 seconds. 2 Within 5 seconds, press (VOL) (+) or (VOL) (-) repeatedly to select "NTSC" or "PAL." Note When changed manually, color system setting for the input video signal does not return to auto mode until the player is turned off or input channel setting is changed. Therefore, when it is set to "PAL," the DVD recorded in NTSC system cannot be viewed on the monitor of the player unless you turn off the player, then turn it on again. 14