Sony MV-900SDS Operating Instructions (primary manual) - Page 6
Where to install, Before installing, When the POWER SELECT switch is, set to, POWER SELECT, switch - remote
View all Sony MV-900SDS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Where to install Before installing this unit, please check your local traffic rules and regulations. Follow the diagram below to install this unit in a suitable position in your car. Do not install this unit where: - It will obstruct the driver's view when the monitor is in either the open or closed position. - It will obstruct the operation of the airbag system. - It will obstruct the operation of the vehicle, especially the steering wheel, shift lever, or brake pedal. - A driver or passengers may injure themselves when getting into or out of the car. If you have any questions or problems concerning your unit that are not covered in this manual, please consult your nearest Sony dealer. When the POWER SELECT switch is set to B Press (POWER) on the player to turn on. The player does not turn on by pressing (POWER) on the card remote commander. POWER SELECT switch B A Before installing Make sure that the POWER SELECT switch is set to the correct position. A*: If your car has an accessory position on the ignition key. B : If your car has no accessory position on the ignition key. * A is the factory preset position. Note Be sure to turn off the player after driving your car. To turn off the player, follow the operations below: - Press (POWER) on the player. - Press (POWER) on the card remote commander. If the power is left on, it will cause battery drain. 6