Sony MVC FD92 Operating Instructions - Page 29
Installing the USB driver, For Windows 98, Windows 98SE, Windows Me and Windows, Professional users - windows 7 driver
UPC - 027242586741
View all Sony MVC FD92 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
B Playback xInstalling the USB driver Do not connect your camera to your computer before installing the USB driver. First, install the USB driver to the computer. The USB driver is contained together with application software for viewing images on a CD-ROM which is supplied with your camera. If the drive is not recognized properly, see "Troubleshooting" on page 77. For Windows 98, Windows 98SE, Windows Me and Windows 2000 Professional users 1 Make sure that the camera is not connected to your computer. Do not connect the USB cable in this step. 2 Turn on your computer and allow Windows to load. 3 Insert the supplied CD-ROM in the CD-ROM drive of your computer. The application software screen appears. 4 Click "USB Driver Installation for Windows 98/98SE, Windows Me, Windows 2000". USB driver installation starts. 5 Follow the on-screen messages to install the USB driver. If the message appears after the installation to verify that you restart the computer, restart the computer. 6 Connect the USB jack (mini-B) on your camera with the USB connector on your computer using the supplied USB cable. To the USB connector To the USB jack Computer USB cable Push the connector as far as it will go 7 Insert a floppy disk or a "Memory Stick" into your camera, and set the MS/FD selector to the appropriate position according to the media inserted. 8 Connect the AC power adaptor and turn on your camera. "USB MODE" appears on the LCD screen of your camera and the camera is set to communication standby mode. Your computer recognizes the camera, and the Windows Add Hardware Wizard starts. 29