Sony MVC FD92 Operating Instructions - Page 80
Reinstall the USB driver when using Windows 98, Windows, 98SE - drivers windows 7
UPC - 027242586741
View all Sony MVC FD92 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Symptom Your computer does not recognize your camera. Cause and/or Solution • The battery level is low. tUse the AC power adaptor (page 13). • The camera is turned off. tTurn on the camera. • The USB cable is not connected firmly. tDisconnect the USB cable, and connect it again firmly. Make sure that "USB MODE" is displayed on the LCD screen (page 29). • The USB connectors on your computer are connected to other equipment besides the keyboard, the mouse, and your camera. tDisconnect the USB cables except for the ones connected to the keyboard, the mouse, and your camera. • The position of the MS/FD selector is not set to the proper position for the media being used. tSet the MS/FD selector to the proper position. • The USB driver is not installed. tInstall the USB driver (page 29). • For Windows 98, Windows 98SE, Windows Me and Windows 2000 Professional users Since the camera is connected to a computer with the USB cable before installing the USB driver, the drive is not recognized properly by the computer. tDelete the drive which is not recognized properly, then install the USB driver. For details, see the procedure below. Reinstall the USB driver when using Windows 98, Windows 98SE, Windows Me and Windows 2000 Professional 1 Turn on your computer and allow Windows to load. 2 Connect the USB jack on the camera and the computer with the supplied USB cable. 3 Insert a media and set the MS/FD selector to the appropriate position according to the media inserted. 4 Connect the AC power adaptor to your camera and then to a wall outlet (mains), and turn on the power of your camera. 80