Sony MZ-N1 Operating Instructions - Page 80
Symptom, Cause/Solution, The recorder does - windows 7 driver
View all Sony MZ-N1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Symptom Cause/Solution The recorder does not work or works poorly. • The recorder is operated when it is on a battery charging stand. , Remove the recorder from the battery charging stand. • You tried to turn group mode on while setting the program. , Turn group mode on before setting the program. • There is an internal malfunction in the system. , Remove the recorder from the USB cradle, restart your computer, and then place the recorder on the USB cradle again. The recorder does not work while connected to the computer. • The computer does not recognize the recorder. , Verify that the recorder is correctly connected. , Place the recorder correctly on the USB cradle. , Install the driver correctly into your computer. , Install the OpenMG software into your computer first, and then connect the recorder. The recorder overwrites existing materials when record. • The record starting-position setting ("REC-Posi") is set to "From Here". , Set "REC-Posi" setting to "From End". "NO SIGNAL" appears in the display when recording from a portable CD player. • There is no digital signal from the portable CD player. , When recording digitally from a portable CD player, use the AC power adaptor and disable the anti-skip function (such as ESP) on the CD player (page 22). There is no recording on the MD after a recording operation. • The AC power adaptor was unplugged or a power outage occurred during recording. The lid does not open. • The power sources have been disconnected during recording or editing, or the battery have been exhausted. , Set the power sources again, or replace the exhausted battery with new ones. • Check-in/Check-out is not finished. , After the dialog box in the display window of your computer disappears and the display window of the recorder indicates that the recorder has stopped, flip the control bar towards x on the recorder and remove the recorder from the USB cradle. 80