Sony MZ-N520 Operating Instructions - Page 73
Connecting the MD Walkman to your computer
View all Sony MZ-N520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Connecting the MD Walkman to your computer After the software installation is completed, connect the MD Walkman to your computer. 1 Insert a recordable disc into the MD Walkman. 2 Make the power source and connect the MD Walkman to the computer using the supplied dedicated USB cable. AC power adaptor To the USB jack/ dedicated jack To the USB connecting terminal MD Walkman To the DC IN jack Dedicated USB cable Computer 3 Check the connections. When the connections have been properly made, "PCppMD"* appears in the display of the MD Walkman. ∗ Depending on the MD Walkman, "Net MD" may be displayed. Note When using the MD Walkman connected to your computer, it is recommended that you run the recorder from an AC outlet. If you use a battery to run the MD Walkman, be sure to use a new dry cell or a fully charged rechargeable battery. We do not assure the results should there be a mis-operation, transferring failure, or destruction of audio data caused by insufficient battery power. 73