Sony MZ-R37SP Operating Instructions - Page 22

3 Press ENTER. 4 Press = or + repeatedly to select a letter and press ENTER to enter. The selected letter stops flashing and the cursor moves to the next input position. Press CAPS VOL +/- =/+ INSERT DELETE p CANCEL To Switch between capital letters, small letters, and marks/numbers. Move the cursor to the left or right. Change the letter to the one before/next one. Insert a blank space to type in a new letter. Delete a letter and move back all following letters to the left. Cancel labeling. Cancel labeling. 5 Repeat step 4 and enter all characters of the label name. 6 Keep pressing ENTER for 2 seconds or longer. The track or disc is labeled. Labeling a track during playback 1 Insert a disc and play the track you want to label. 2 Keep pressing EDIT for 2 seconds or longer. " " "Name" flashes in the display. 3 Press ENTER. The track is ready to be labeled. 4 Follow steps 4 to 6 of "Labeling a disc during stop" above. Labeling a track or a disc during recording 1 Keep pressing EDIT for 2 seconds or longer during recording. " " "Name" flashes in the display. 2 To label a track, press ENTER. To label a disc, press = or + repeatedly until " " "Name" flashes in the display, then press ENTER. 3 Follow steps 4 to 6 of "Labeling a disc during stop" above. To cancel labeling, press CANCEL. Available characters • Capital and small letters of the English alphabet • Numbers 0 to 9 space) To relabel recordings Follow the steps corresponding to the labeling method until the disc or track is ready to be labeled. Enter a new character over the one you want to change, then keep pressing ENTER for 2 seconds or longer. Notes •You cannot relabel premastered MDs or label MDs that have not been recorded. •The recorder is able to display, but cannot label using, Japanese "Katakana" characters. 22