Sony MZ-R37SP Operating Instructions - Page 30
Messages, Error message, Meaning/Remedy
UPC - 027242566194
View all Sony MZ-R37SP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Messages If the following error messages flash in the display window, check the chart below. Error message BLANK ERROR FULL SAVING EDIT BUSY HiDCin HOLD LoBATT MEMORY Meaning/Remedy • An MD with no recording on it is inserted. b Insert a recorded MD. • The disc is damaged or does not contain proper recording or editing data. b Reinsert the disc. If this fails, rerecord. • There is no more space to record on the disc (less than 12 seconds available). b Replace the disc. • You tried to enter more than 200 letters to label a single track or disc. • You tried to enter a total of more than 1700 letters for track or disc names during playback or stop. • You tried to enter a total of more than 500 letters for track or disc names during a single recording. b Enter the characters within the limit. • The recorder is recording information (sounds) from the memory to the disk. b Wait until this process is completed. Do not expose the recorder to any physical shock, nor disrupt power supply. • The recorder is recording information (track start and end position) from the memory to the disk. b Wait until this process is completed. Do not expose the recorder to physical shock, nor disrupt power supply. • You tried to operate the recorder while it was accessing the recorded data. b Wait until the message goes out (in rare cases, it may take 2-3 minutes). • Voltage of the power supply is too high. b Use the AC-E45HG (not supplied). • The recorder is locked. b Slide HOLD against the arrow to unlock the recorder (page 17). • Batteries are weak. b Charge the rechargeable batteries or replace the dry batteries (pages 23, 24). • You tried to record when there is no indication in the display, with the recorder placed where it receives continuous vibration. b Put the recorder on a stable place, and start recording again. 30