Sony PCM-A10 Help Guide - Page 117
What is NFC?
![]() |
View all Sony PCM-A10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
Help Guide Linear PCM Recorder PCM-A10 Establishing a Bluetooth connection with the one-touch operation (NFC connection) If a smartphone has the NFC function, follow the steps below to establish a Bluetooth connection between the smartphone and your linear PCM recorder. 1 Turn on your linear PCM recorder. 2 On the smartphone, turn on the NFC function. 3 Start REC Remote. 4 Put the smartphone onto your linear PCM recorder aligning the marks on both devices with each other. Keep the smartphone on the linear PCM recorder until the [Bluetooth pairing request] screen appears on the smartphone, and then select [Pair]. When the operation screen of REC Remote appears on the smartphone, the Bluetooth connection should be successfully established. Proceed to Using the smartphone for linear PCM recorder operations. Hint During a pairing attempt, [Bluetooth pairing request] may appear in [Notifications] on the smartphone. View the [Notifications] list and tap [Bluetooth pairing request] and then select [Pair]. If the Bluetooth connection is not established, try the following: Keep the smartphone touched on the mark on your linear PCM recorder and slowly move the smartphone back and forth and around. If the smartphone is in a smartphone case, remove the case and perform the above steps all over again. Check if the NFC function of your linear PCM recorder is turned on. Select [ Bluetooth] - [NFC Settings] from the HOME menu and make sure that [ON] is selected. If neither of the above works, try the steps in Establishing a Bluetooth connection between the smartphone and the linear PCM recorder. What is NFC? NFC (Near Field Communication) is a technology that enables short-range wireless communications between various devices, including mobile telephones and IC tags. You can exchange data by simply putting a device onto the designated area on another device. With an NFC-enabled smartphone, you can simply put it onto the mark on the linear PCM recorder to establish a Bluetooth connection by pairing both devices with the NFC function. You can also disconnect or switch the Bluetooth 117
![](/manual_guide/products/sony-pcma10-help-guide-ac1d3a4/117.png)