Sony PCMM10/B Product Manual (Operations Manual) - Page 97
General, Signal-to-noise ratio S/N
View all Sony PCMM10/B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Signal-to-noise ratio (S/N) (Input from the LINE IN jack and output from LINE OUT jack when recording/playing back LPCM) 87 dB (1 kHz IHF-A) (for 24 bit) General Speaker Approx. 16 mm dia. Input/Output • Microphone jack (minijack, stereo), input for plug in power - Input impedance: 22 kΩ - Minimum input level: 0.9 mV - Rated input level: 2.5 mV • LINE IN jack (minijack, stereo) - Input impedance: 22 kΩ - Minimum input level: 500 mV - Rated input level: 2 V • Headphone/LINE OUT jack (minijack, stereo) Headphone mode - Load impedance: 16 Ω - Output level: 20 mW + 20 mW LINE OUT mode - Load impedance: 22 kΩ - Rated output level: 1 Vrms • USB connector (mini-B jack, High-speed USB, Mass Storage Class) • REMOTE jack • DC IN 3V jack • Memory Stick Micro™ (M2™)/microSD memory card slot Playback speed control (DPC) +100% to -75% (LPCM/MP3/WMA/AACLC) Maximum power output 250 mW Power requirements DC 3.0 V: When using a commerciallyavailable applicable AC power adaptor DC 3.0 V: LR6 (size AA) alkaline batteries (supplied) (2) DC 2.4 V: NH-AA nickel metal hydride rechargeable batteries (not supplied) (2) Operating temperature 5°C - 35°C Dimensions (w/h/d) (not incl. projecting parts and controls) (JEITA)*4 62.0 mm × 114.0 mm × 21.8 mm Mass (JEITA)*4 Approx. 187 g including 2 LR6 (size AA) alkaline batteries *4 Measured value by the standard of JEITA (Japan Electronics and Information Technology Industries Association) Supplied accessories See page 9. 97GB Additional Information