Sony PCV-RX450 System Reference Manual - Page 49
Press down firmly and evenly at both corners until the module is, fully seated.
View all Sony PCV-RX450 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Removing, Installing, and Replacing Components 35 7 Align the module over the appropriate slot, noting the location of pin 1 on the module and pin 1 on the slot. Press down here Handles Pin 1 side DIMM 2 DIMM 1 Memory module (DIMM) 1 Indicates pin 1 8 Carefully but firmly insert the edge of the module into the slot. 9 Press down firmly and evenly at both corners until the module is fully seated. ✍ When the module is fully seated, the handles on each side are straight up and locked into the slot on each side of the module. If the handles are not totally straight upright, continue to press down on each side of the module until the handles lock into place.
Removing, Installing, and Replacing Components
35
7
Align the module over the appropriate slot, noting the location of pin
1 on the module and pin 1 on the slot.
8
Carefully but firmly insert the edge of the module into the slot.
9
Press down firmly and evenly at both corners until the module is
fully seated.
✍
When the module is fully seated, the handles on each side are straight up and
locked into the slot on each side of the module. If the handles are not totally
straight upright, continue to press down on each side of the module until the
handles lock into place.
1
Press down
here
Handles
Pin 1 side
DIMM 2
DIMM 1
Memory module (DIMM)
Indicates pin 1