Sony PCWA-A200 Primary User Manual - Page 24

Additional information Precautions AC power adapter Be sure to use the supplied AC power adapter. Other AC power adapters may cause a failure to the Access Point. Safety Do not drop the Access Point. Careful handling will help prevent damage. Installation Do not place the Access Point where it will be exposed to the following conditions: • Unstable surfaces. • High humidity or poor ventilation. • Excessive dust. • Direct sunlight or extreme heat. • Closed cars. • Magnetized locations (near magnets, speakers, or televisions). • Locations exposed to frequent vibration. • Locations where the transmission of radio waves may be obstructed by metal plates or concrete walls Operation Exposure to cold-to-hot temperature extremes or very damp environments may cause moisture to condense on internal parts. This may prevent the Access Point from operating properly. If this should happen, unplug the AC power adapter from the power outlet and let the Access Point sit for two to three hours or until the moisture evaporates. Cleaning Clean the casing with a soft cloth, lightly moistened with water or a mild detergent solution. Do not use any type of abrasive pad, scouring powder or solvent such as alcohol or benzene. This may damage the finish of the casing. 24