Sony PlayStation 3 Instruction Manual - Page 13

Getting started Connection methods US  Connect your system to a TV You can use any of the following methods to connect your system to a TV. Video output in SD (Standard Definition) resolution Getting started VIDEO L-AUDIO-R HDMI OUT AV MULTI OUT  connector connector AV MULTI OUT AV Cable connector TV Video output in HD (High Definition) resolution - component video COMPONENT VIDEO IN AUDIO IN Y PB/CB PR/CR L R Caution Any TV or component connected to the system must be functioning properly and free of defects. If a TV or component connected to the system is AV MULTI OUT connector Component AV Cable (sold separately) faulty or defective, it may cause damage to the TV TV or component, or to the system itself. As with all electrical products, connection to faulty or defective components, or the failure to connect to a properly wired outlet, may cause sparking and Video output in HD (High Definition) resolution - HDMI pose a fire hazard. If video is not displayed on the screen HDMI OUT HDMI Cable (sold separately) If you change the type of cable used to connect the connector TV system to a TV, video may not appear on the screen. If video does not appear, turn off the system and then turn it on again by pressing the power button for at least five seconds (until the system beeps twice). The video output setting will be reset and video will be output at standard definition (SD) resolution. Hints  For details about video output cable types and supported video modes, see "Video output on the PS3™ system" ( page 16) and "Video output cable types" ( page 17).  You can connect audio devices that support digital audio playback, such as an AV receiver for home entertainment use. For details, see "Connecting digital audio devices" ( page 20). 13