Sony PlayStation 3 Instruction Manual - Page 18
Adjusting video output settings - customer support
UPC - 999999122049
View all Sony PlayStation 3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Getting started Adjusting video output settings Depending on the type of cables and the connectors used, you may need to adjust the PS3™ system's video output settings to display video at HD resolutions ( page 16) on a TV. If video is not displayed Switch the video input of the TV to match the input connector used to connect to the system. Turn off the system, and then turn it on again by pressing the power button for at least five seconds (until the system beeps twice). The video output setting will be reset and video will be output at standard definition (SD) resolution. 3 Confirm the screen, and then press the button. If you changed the connector in step 2, a screen for confirming the change will be displayed. 4 Confirm the settings, select [Yes], and then press the button. If you changed the connector in step 2, a screen for confirming the settings will be displayed. 1 Select (Settings) (Display Settings) [Video Output Settings], and then press the button. 2 Select the input connector ( page 17) in use on the TV, and then press the button. 5 Select the resolutions supported by the TV, and then press the button. The resolution displayed on the TV varies depending on the input connector and the type of cable used ( page 17). The highest resolution you selected will be used for video output. Depending on the connector selected in step 2, this screen may not be displayed. If you select [HDMI], you will have the option to choose [Automatic] or [Custom] on the next screen. In most cases, select [Automatic], and video output settings will be completed automatically. If you select [AV MULTI / SCART], you must choose the type of output signal 18 on the next screen. In most cases, select [Y Pb/Cb Pr/Cr].