Sony PlayStation 3 Instruction Manual - Page 39
Replacing the hard disk, Replacement hard disks
UPC - 999999122049
View all Sony PlayStation 3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Replacing the hard disk Caution For safety reasons, be sure to turn off and unplug the system before attempting to replace the hard disk. When replacing the hard disk, follow the procedure below to remove the metal frame. 1 Using a crosshead screwdriver, remove the screws (4 places). 2 Hold the hard disk by the edges, and then turn it over. Grasp firmly by the opening on either side to prevent slipping. 3 Remove the hard disk from the metal frame. US Replacing the hard disk 4 Place the replacement hard disk on the metal frame for the PS3™ system's hard disk, and then attach using the screws (4 places). Do not overtighten the screws. 5 Install the hard disk in the system. Refer to the instructions in "Removing the hard disk" ( page 37) and follow the steps in reverse order when installing. Be sure to fully insert the hard disk in the HDD bay. 6 Reinstall the system software. After the hard disk has been replaced, the system software must be reinstalled ( page 40). Replacement hard disks You can use hard disks of the following types with the PS3™ system. Size Interface format 2.5 inch (internal type) *1 Serial ATA *2 *1 Proper operation is not guaranteed for all models. *2 Parallel ATA is not supported. 39