Sony RCD-W1 Operating Instructions (primary manual) - Page 13

Basic Operations To erase the last programmed track Press CLEAR on the remote. Each time you press the button, the last programmed track is erased. Tip The program remains even after Program Play ends. When you press H, you can play the same program again. Notes • "Full" appears on the front panel display when you program over 20 tracks. Erase the unnecessary tracks to enter other tracks. • The program is erased when you press POWER to turn off. Alternating Discs from One Tray to the Other (Relay Play) When there is a disc in each deck, you can alternately play the decks so that when one disc is finished, the other will begin to play automatically for continuous play between the 2 decks. When using the remote, set SELECT to CD for operations on DECK A, or to CDR for operations on DECK B. RELAY RELAY Press RELAY until "RELAY" appears in the display. When the disc in DECK A has played through to the end, DECK B begins play. Play alternates between the two decks continuously until you press stop or change operations. To stop Relay Play Press x. Notes • "REPEAT" or "REPEAT 1" is canceled if you set Relay Play. • When Relay Play is ON, the playback audio signal is output from both CD OUT and CD-R OUT. 13