Sony RCD-W1 Operating Instructions (primary manual) - Page 22

Erasing a single track of CD-RW disc You can erase one track on a CD-RW at a time. This process starts with the last track on the disc. Please note that before erasing a track, you must unfinalize the disc. If the disc is not unfinalized, follow the instructions of "Unfinalizing a CD-RW disc" (page 21). When using the remote, set SELECT to CDR for operations on DECK B. Notes • The TOC (red) indicator appears on the front panel display if the disc you put in the DECK B has not been finalized. Check the indicator each time before erasing the last track of a disc. • Once erasing process starts, you cannot stop in the middle of the process. • Do not turn off the recorder or disconnect the recorder from the power source in the middle of the erasing process. ERASE ERASE 1 Press the ERASE button. The "LAST TR ERASE" indicator will begin to flash, and the PLAY, PAUSE, and REC indicators light up for about 8 seconds. Erasing enters in standby mode. 2 Press H while "LAST TR ERASE" is flashing. The last track erasing starts. During the last track erasing, "LAST ERASE" appears in the display and the remaining time for erasing the last track appears in the display. When this process is finished, the total track number and the total playing time appears in the display. 22