Sony RCD-W222ES Primary User Manual - Page 21

Adjusting the Recording Level Adjusting the recording level for digital recording You can adjust the recording level using the Setup Menu. (For details of "Using the Setup Menu," see page 28.) When using the remote, set SELECT to CDR. MENU/NO 6 While monitoring the sound, turn AMS (or press ./> on the remote) to adjust the recording level, then press AMS (or YES). Adjust the recording level within a range of - ∞ to +18 dB, so that the OVER indication of the peak level meters does not light up in red. OVER indication Recording/Editing SELECT MENU/NO AMS REC LEVEL YES ./> 1 Do Steps 1 to 4 of "Recording on a CD- R or CD-RW Manually" on page 20. 2 Play the portion of the sound source with the strongest signal level. 3 Press MENU/NO. 4 Turn AMS (or press ./> on the remote) to select the program source. To select Display DECK A DECK A Lvl a component connected to Optical Lvl the DIGITAL OPTICAL IN jack a component connected to Coaxial Lvl the DIGITAL COAXIAL IN jack 5 Press AMS (or YES). OVER TOC DECK B CD TEXT CD - RW 7 Press MENU/NO. 8 Stop playing the sound source. 9 To start recording, do Steps 6 and 7 of "Recording on a CD-R or CD-RW Manually" on page 20. Note You cannot change the setting of the DIGITAL OPTICAL or DIGITAL COAXIAL output level even if you adjust the recording level for digital recording. Adjusting the recording level for analog recording Turn the REC LEVEL control on the front panel. Adjust the recording level so that the OVER indication on the peak level meters does not light up. Note You can adjust the recording level while recording, not while playing a disc in DECK B. 21