Sony RCD-W222ES Primary User Manual - Page 8
Playing a CD
View all Sony RCD-W222ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Basic Operations Playing a CD This unit has two decks. In this manual, the CD player section is just called DECK A, and the CD-R and CD-RW recording section is called DECK B. When using the remote, set SELECT to CD for operations on DECK A (the CD player section), or to CDR for operations on DECK B (the CD-R or CD-RW recording section). POWER DISC 1-5 A OPEN/CLOSE N x AMS X PLAY MODE AMS X Nx 1 Turn on the amplifier and adjust the volume to the minimum. 2 Set the function of the connected amplifier with its input selector. 3 Press POWER. 4 Press OPEN/CLOSE (or one of the DISC 1-5 A buttons for DECK A) and place a disc on the inner circle of DECK A (or B). Press OPEN/CLOSE (or A) again to close the disc tray. With the label side up 5 For DECK A, press PLAY MODE repeatedly to select the Continuous play mode. When you The unit plays select ALL DISCS All discs in the unit consecutively in the order of the disc number. 1 DISC Only one disc you have selected. 8 6 Press N (or H on the remote). The unit starts playing. Adjust the volume on the amplifier. To Do the following: Stop playback Press x. Pause playing Press X. Press the button again or press N (or H on the remote) to resume playing. Select the disc (for DECK A) Press one of the DISC 1-5 buttons.* Go to the next disc Press D. SKIP on the remote. (for DECK A) Z Go to the next track Turn AMS**clockwise (or press > on the remote ). Go to the beginning of the current track or the preceding track Turn AMS counterclockwise (or press . on the remote). Remove the disc Press OPEN/CLOSE (or A), whichever contains the disc you want to remove after stopping play. * When the disc is in the unit, the indicator lights up in orange, then it turns green when the disc is selected. **AMS: Automatic Music Sensor Tips • You can start playing with the track selected in Step 6. 1 Turn AMS (or press ./> or the number buttons on the remote) to select the track you want to play using the display*. 2 Press N (or H on the remote). *See "Using the Display" on page 9. • You can remove or load discs while playing the other deck. Press OPEN/CLOSE (or A) of the deck that is not currently playing to open that tray, and remove or load a disc. • The DISC 1-5 button indicator lights up when the disc is in the tray. The indicator turns to green when the disc is selected. • You can connect a headphone to the PHONE jack on the front panel. Turn the PHONE LEVEL control to adjust the volume. • You can replace any discs in the other disc trays while playing a disc in DECK A. Press OPEN/ CLOSE (or A) of the deck that is not currently playing to open that tray, and remove or load a disc. Notes • You can play unfinalized CD-Rs or CD-RWs only in DECK B. For the detailed explanation about finalizing, see "Finalizing a CD-R or CD-RW" on page 24. • Do not leave the disc tray open when the unit is not in use to prevent dust and dirt from entering and prevent damage to the disc tray. • When you turn on the unit, you will hear some mechanical noise from the unit. This is not a malfunction.