Sony RDP-XA900iP Operating Instructions - Page 23
Listening to Bluetooth Devices, Pairing with a Bluetooth device, Operating a Bluetooth device
View all Sony RDP-XA900iP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Listening to Bluetooth Devices By using the Bluetooth connection, you can listen to the sound from a Bluetooth device such as a mobile phone or portable audio player with the unit wirelessly. Bluetooth devices need to be "paired" with each other beforehand. Once Bluetooth devices are paired, there is no need for pairing again, unless pairing information is deleted. Pairing with a Bluetooth device You can register up to nine Bluetooth devices to be paired on the unit. If you register a 10th device, the least recently used information is deleted. 1 Keep a Bluetooth device and the unit within one meter of each other for this operation. 2 Press and hold the PAIRING button on the unit. When pairing starts, a double-beep sound will be heard and the Bluetooth indicator will flash quickly. Pairing mode of the unit is activated. 3 Perform the pairing procedure on the Bluetooth device to detect the unit. A list of detected devices appears on the display of the Bluetooth device. This unit is displayed as "RDP-XA900iP (Bluetooth)." If "RDP-XA900iP (Bluetooth)" is not displayed, repeat from step 1. 4 Select "RDP-XA900iP (Bluetooth)" shown in the display of the Bluetooth device. 5 If Passcode* input is required on the display of the Bluetooth device, input "0000." * Passcode may be called "Passkey," "PIN code," "PIN number," or "Password." 6 Start the Bluetooth connection from the Bluetooth device. The unit memorises the device as the last connected device. Some Bluetooth devices may connect with the unit automatically when pairing is complete. The Bluetooth indicator lights up when the connection is made. Tips • For details on how to operate the device to be connected, refer to the operating instructions supplied with the device. • To pair with other Bluetooth devices, repeat steps 1 to 5 for each device. Notes • Pairing mode is cancelled after about 5 minutes. If pairing mode is cancelled halfway, start over from step 1. • When you try to pair the unit with your Bluetooth device for the first time, the pairing mode is activated as soon as you press the BLUETOOTH button. In this case, the pairing mode is not cancelled after about 5 minutes. • Pairing information is deleted after repair, etc. • Passcode of the unit is fixed as "0000." The unit cannot be paired with a Bluetooth device whose Passcode is not "0000." Operating a Bluetooth device The unit supports SCMS-T content protection. You can listen to a Bluetooth device that supports SCMS-T content protection. Check the following before operating the unit. • The Bluetooth function of a Bluetooth device is on. • The pairing procedure is complete (page 19). 19US