Sony RDP-XA900iP Operating Instructions - Page 28
Network, AirPlay, The AirPlay icon or unit name does
View all Sony RDP-XA900iP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Network The browser screen does not appear. • Check the proxy setting of the browser. This unit does not support proxies. Change the browser setting to one connecting this unit without a proxy. WPS configuration method failed. • You cannot connect to a network using WPS when the wireless LAN router/ access point is set to WEP (page 31). Set up the network using D-Sappli or Access Point Scan (page 12). The unit cannot connect to the network. (The unit cannot be found or recognized by other devices that are on the home network.) • Check that the wireless LAN router/access point is close to the unit. • Move the unit and the wireless LAN router/access point closer to each other and perform the setup again. • Make sure that the wireless LAN router/ access point is turned on. • Turn the unit off and then on again, and reboot the wireless LAN router/access point. • Devices that use a 2.4 GHz frequency band such as microwave, Bluetooth or digital cordless device, may interrupt the communication. Move this unit away from such devices, or turn off the devices. The unit cannot connect to the network via a Wi-Fi connection. • Make sure a network (LAN) cable is not connected to the unit. The unit automatically tries to connect to the network over a wired LAN connection when a network (LAN) cable is connected to the unit. • Confirm that the wireless LAN router/ access point setting is correct. For details on the wireless LAN router/access point setting, refer to the operating instructions of the wireless LAN router/access point. 24US Resetting the network settings of the unit (default network setting) • Press and hold the RESET (NETWORK) button on the rear of the unit with a thin object such as a small pin (page 9). AirPlay The "AirPlay" icon or unit name does not appear on iPod touch/iPhone/iPad or iTunes. • Make sure the LINK indicator lights up green or amber. See "The unit cannot connect to the network. (The unit cannot be found or recognized by other devices that are on the home network.)" (page 24) if the LINK indicator turns off or lights up red. • Check that this unit, your iPod touch/ iPhone/iPad, Mac or PC are connected to the same network. • Update the software version of the unit to the latest version (page 21). • Check that your iPod touch/iPhone/iPad or iTunes has the latest software version. • If the problem persists, reboot your iPod touch/iPhone/iPad or iTunes. • Check your set-up of the firewall of the security software. Refer to the operating instructions or the help documentation of your device or software for details. Audio content automatically changed/ started/stopped. • When the unit is turned on or in the network standby mode, it is under the control of an "AirPlay" device. If you want to reject requests from the "AirPlay" device, turn the unit to the standby mode by pressing and holding ?/1 button until the colour of the ?/1 indicator changes. There is no sound. • Check that no other iPod touch/iPhone/ iPad is set on this unit. If so, remove it from the network.