Sony RDP-XA900iP Operating Instructions - Page 25
Listening to Other Components, Updating the Software
View all Sony RDP-XA900iP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Listening to Other Components You can enjoy the sound from an optional component, such as a TV or a portable digital music player. Be sure to turn off the power of each component before making any connections. 1 Firmly connect the line output jack of a TV (or other component) to either of the AUDIO IN terminals (DIGITAL (OPT) or ANALOG) on the rear of the unit, using a suitable audio connecting cable (not supplied). 2 Press the ?/1 button to turn on the unit. 3 Turn the connected component on. 4 Press the AUDIO IN button to select the source. 5 Operate the connected component. Notes • If each terminal is connected to a different component, and both are playing back, the unit will output sound from the component connected to the DIGITAL (OPT) terminal. • When you use the ANALOG terminal and the volume is low, adjust the volume level on the connected equipment first. If the volume is still too low, adjust the volume level on the unit. • The DIGITAL (OPT) terminal supports Linear PCM 2ch. signal only. Linear PCM multi-channel is not supported. You may need to change the sound setting of the connected component. If digital audio signals or other signals that this unit does not support are input, the AUDIO IN indicator flashes and sound is not output. Updating the Software When a new update is available, the UPDATE indicator lights up green while the unit is connected to the Internet. 1 Check that the UPDATE indicator lights up green. 2 Press and hold the UPDATE button on the top of the unit. The unit beeps, then quits or stops all operations automatically and the update starts. The UPDATE indicator flashes during the update. When the update has completed, the UPDATE indicator turns off. Notes • When an error occurred, the UPDATE indicator flashes quickly and all other indicators light up. Then the unit restarts automatically. • You cannot operate the unit until updating has completed. • It may take about 20 minutes to update the software. The time required depends on the size of the update content and type of Internet connection you are using. • Do not disconnect the AC power cord during the update. 21US