Sony RM VL600 Operating Instructions - Page 13

Setting a Component Code by the Search Function You can find a code number available for a component that doesn't have one in the supplied "Component code numbers." Before starting the Search function Set each component to the following status so that the Search function works effectively. TV, AMP: Power-on CD player, MD player*, cassette deck: Power-on with a playback source (disc, cassette tape, etc.) Other components: Power-off * If any of these components are assigned to any of the Component Select buttons (page 33), you can set a component code using the Search function. SET TV/VIDEO POWER TV DVD SAT CBL VCR CD TAPE AMP VIDEO1 1 TUNER 4 MD 7 VOL VIDEO2 2 CD 5 TV 8 DVD 0 DIGITAL /ANALOG AUX 3 TAPE 6 PHONO 9 ENT CH TWIN VIEW SLEEP MUTING GUIDE INFO RECALL MENU OK EXIT TOOLS 1 3 2 4 3 1 SYSTEM CONTROL ABCD 1 Press and while holding SET, press MENU. MENU + SET The SET indicator lights up. SET 2 Press the Component Select button for the desired component. TV The SET indicator and the selected Component Select button lights up. SET TV VCR DVD CD SAT TAPE CBL AMP 3 Press CH + or CH - and POWER in turn until the component reacts as described in the following. TV: Powers off VCR, CBL, DVD, AMP: Powers on CD player, MD player, cassette deck: Plays back CH POWER Press CH + to go to the next code number. Press CH - to go back to the previous code number. The Component Select button flashes three times after the numbers have turned one cycle. One cycle means, for example, the four-digit code numbers beginning from "8" are cycled through. Continued 13