Home » Sony Manuals » Remote Controls » Sony RM VL600 » Manual Viewer

Sony RM VL600 Operating Instructions - Page 4

Startup Guide - remote codes

UPC - 027242683433

Add to My Manuals
Save this manual to your list of manuals

Page 4 highlights

Startup Guide This guide shows you how to set the Remote Commander to operate your components. First, find the four-digit component code number for your component, referring to the supplied "Component code numbers." If you have the code number If you cannot find the code number Example: To set up a TV of the code number "8011" 1 Set the Remote Commander for code input mode. MENU + SET Press SET and MENU. 2 Press the desired Component Select button. SET TV VCR DVD CD SAT TAPE CBL AMP 3 Enter the code number. 8 0 1 1 You can search for the component code available for your component. 1 Set the Remote Commander for code input mode. MENU + SET Press SET and MENU. 2 Press the desired Component Select button. SET TV VCR DVD CD SAT TAPE CBL AMP 3 Transmit code number signals in turn. CH 4 Finish setting. ENT Press ENT. POWER Press CH + or CH -, and then POWER. Repeat until your component reacts. 4 Finish setting. ENT Press ENT. For more details, see page 10. 4 For more details, see page 13.

Section	Page
Table of Contents	6
Getting Started	8
Installing the Batteries	8
When to replace the batteries	8
Location of Controls	9
Basic Operations	10
Setting the Code for non-Sony Preset Audio and Visual Components — Setting component codes	10
Setting a component code	10
Checking if the code number works	12
Setting a Component Code by the Search Function	13
Operating Your Components with the Remote Commander	14
To control the volume	15
Programming Signals of Another Remote Control — Learning Function	16
For accurate Learning	19
Programming remote control signals to the Component Select buttons and System Control buttons	20
Changing or erasing the function of a “learned” button	22
Notes on programming the signals for an air-conditioner	24
Advanced Features	25
Controlling the Volume of Visual Components Connected to an Audio System	25
Adding an Extra Function to the Component Select Buttons	27
Programming the Power-On Command of the Selected Component just by pressing that Component Select button (for Sony Components only)	27
Executing a Series of Commands — System Control Functions	29
To clear programmed commands	31
Programming a Series of Commands to on the Component Select Buttons	32
To clear programmed commands	33
Assigning Other Components to the Component Select Buttons	33
Using Other Functions	34
Locking the Controls — Hold Function	34
Erasing all settings — To reset the Commander to its factory settings	35
Additional Information	36
Precautions	36
Maintenance	36
Specifications	36
Troubleshooting	37
Appendixes	39
Table of Preset Functions	39
TV (ANALOG)	39
TV (DIGITAL)	40
VCR	41
CBL (Cable box)	41
SAT	42
DVD	42
DVR (Digital video recorder)	43
CD	44
MD	44
DAT	45
DECK	45
AMP	45
Digital Cable Box	46
DAV (DVD/Receiver combo)	46
Digital TV TUNER	47