Sony RM-VL610N Operating Instructions - Page 20
Programming remote control signals to the Component Select buttons and System Control buttons
View all Sony RM-VL610N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Programming signals of another remote control - Learning Function (continued) Programming remote control signals to the Component Select buttons and System Control buttons You can "teach" one operating procedure to a Component Select button and System Control buttons, so that when you press the Component Select button and System Control buttons, the operation is also automatically done. For example, if it is necessary to switch the input selection of an amplifier to DVD when you use a DVD player, "teach" an input select signal to the DVD button. After "learning," the input selection of an amplifier is automatically switched to DVD just by pressing DVD. (For this operation, the amplifier should first be turned on.) Example: To "teach" the DVD input remote control signal of your amplifier to the DVD Component Select button of the Commander 2 Press and hold the Component Select button for the component whose signals are to be "learned" for over 3 seconds. To teach signals to the SYSTEM CONTROL buttons, press and hold the desired SYSTEM CONTROL button for over 3 seconds. Both the SET indicator and the selected Component Select button light up. When you "teach" signals to the SYSTEM CONTROL buttons, only the SET indicator lights up. When the SET indicator lights up, you can release the Component Select button. The SET indicator flashes and the selected Component Select button lights up (Learning function standby). 1 Follow Steps 1 to 2 (page 16). When you "teach" signals to the SYSTEM CONTROL buttons, you can release the SYSTEM CONTROL button when the SET indicator lights up. The SET indicator lights up, but the SYSTEM CONTROL button does not light up. 20