Sony RM-VL610N Operating Instructions - Page 24

24

Programming signals of another

remote control — Learning

Function (continued)

2

While holding

x

pressed,

press the Component Select

button you want to erase.

When erasing of a “learned”

function has completed, all the

other Component Select button

lights turn off.

Notes

• With this operation, you can only

erase the “learned” functions of

all buttons for a specific

component.

• To erase a single “learned”

function of a Component Select

button, see page 22.

3

Press SET to finish setting.

To cancel erasing, press SET.

during data

erasing

data erasing

complete

Notes on programming the

signals for an air-

conditioner

About seasonal adjustments

If you change the settings of the

air-conditioner for the season, you

have to program the remote

control signals of the new settings

on the Commander.

If the power-on/off operation

does not work correctly

If the Commander can only

operate “ON” with one button

and “OFF” with another, while

your air-conditioner’s remote

control can operate “ON/OFF”

with a single button, program the

signal on two buttons of the

Commander as follows.

1

Clear the “learned” power-on/

off signal on the programmed

button of the Commander.

2

Reprogram only the power-on

signal of the air-conditioner on

the button of the Commander

by following the steps of

“Programming signals of

another remote control-

Learning Function” (page 16).

3

Program the power-off signal of

the air-conditioner on another

button of the Commander.

The two buttons of the

Commander have been

programmed with the power-on

signal and the power-off signal of

the air-conditioner respectively, so

that you can operate the air-

conditioner with the Commander.

Section	Page
Table of Contents	6
Getting Started	8
Installing the Batteries	8
When to replace the batteries	8
Location of Controls	9
Basic Operations	10
Setting the Code for non-Sony Preset Audio and Visual Components — Setting component codes	10
Setting a component code	10
Checking if the code number works	12
Setting a Component Code by the Search Function	13
Operating Your Components with the Remote Commander	14
To control the volume	15
Programming Signals of Another Remote Control — Learning Function	16
For accurate Learning	19
Programming remote control signals to the Component Select buttons and System Control buttons	20
Changing or erasing the function of a “learned” button	22
Notes on programming the signals for an air-conditioner	24
Advanced Features	25
Controlling the Volume of Visual Components Connected to an Audio System	25
Adding an Extra Function to the Component Select Buttons	27
Programming the Power-On Command of the Selected Component just by pressing that Component Select button (for Sony Components only)	27
Executing a Series of Commands — System Control Functions	29
To clear programmed commands	31
Programming a Series of Commands to on the Component Select Buttons	32
To clear programmed commands	33
Assigning Other Components to the Component Select Buttons	33
Using Other Functions	34
Locking the Controls — Hold Function	34
Erasing all settings — To reset the Commander to its factory settings	35
Additional Information	36
Precautions	36
Maintenance	36
Specifications	36
Troubleshooting	37
Appendixes	39
Table of Preset Functions	39
TV	39
VCR	40
CBL (Cable box)	40
SAT	41
DVD	42
DVR (Digital video recorder)	43
CD	44
MD	44
DECK	45
AMP	45
DAV (DVD/Receiver combo)	46
Digital TV TUNER	47

Sony RM-VL610N Operating Instructions - Page 24

Notes on programming the signals for an air-conditioner, While holding, pressed

Page 24 highlights