Sony RM-VL700S Operating Instructions - Page 34
For the customers in the U.S.A, Troubleshooting continued - remote manual
View all Sony RM-VL700S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Troubleshooting (continued) Symptom Remedy The SET indicator falshes • Learning has not succeeded. See "For accurate Learning" five times during the (page 18) and try the Learning procedure again (page 15). Learning procedure. • Clear infrequently used Learned functions (page 21), then carry out learning operations. A Component Select • The component codes cannot be set. See the supplied button flashes five times "Component Code Numbers" and try setting the component during setting. codes again (page 8). The SET indicator falshes • A selected Component Select button or another button to be twice during the set has any remote control signals programmed by Learning Learning procedure. function (page 15). Clear the "learned" signals (page 21) or select another button which has no "learned" signals, and try setting again. All Component Select buttons flash twice. • The Hold function is on. Unlock the Hold function (page 30). The Component Select buttons flash by a constant interval when you press a button. • Batteries are weakened. Replace them with new ones. For the customers in the U.S.A Customer Support Information After you have read through this manual, if you still cannot get the Remote Commander to work properly, call the Sony Customer Support Helpline at 1-800-822-2217. 34