Sony RM-VL710 Operating Instructions - Page 4

Table of Contents Getting Started Installing the Batteries 6 When to replace the batteries 6 Location of Controls 7 Basic Operations Setting the Code for non-Sony Preset Audio and Visual Components - Setting component codes 8 Setting a component code 8 Checking if the code number works 10 Setting a component code by the Search function 11 Operating Your Components with the Remote Commander 12 To control the volume 13 Programming signals of another remote control - Learning Function .... 14 For accurate Learning 17 Programming remote control signals to the Component Select buttons ..... 18 Changing or erasing the function of a "learned" button 20 Notes on programming the signals for an air-conditioner 22 Advanced Features Controlling the Volume of Visual Components Connected to an Audio System ...23 Adding an Extra Function to the Component Select Buttons 25 Programming the Power-On Command of the Selected Component just by pressing that Component Select button (for Sony Components only 25 Executing a Series of Commands - System Control Functions 26 To clear programmed commands 28 Programming a series of commands to on the Component Select buttons ...29 To clear programmed commands 30 Assigning Other Components to the Component Select Buttons 30 Copying the settings of a Component Select button to another button .... 31 Using Other Functions Locking the Controls - Hold Function 32 Erasing all settings - To reset the Commander to its factory settings ..... 33 4