Sony SCD-XE670 Operating Instructions - Page 8
Connecting via ANALOG 2CH, OUT jacks, Connecting via DIGITAL CD, OUT OPTICAL connector, Connecting
View all Sony SCD-XE670 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Hooking Up the System (continued) Connecting via ANALOG 2CH OUT jacks Use an audio connecting cords for this connection. Connect the ANALOG 2CH OUT L/R jacks to the CD (SACD) input jacks of your amplifier. Be sure to match the colorcoded pin to the appropriate jacks: white (left) to white and red (right) to red. Connecting via DIGITAL (CD) OUT OPTICAL connector Use an optical digital cable for this connection. When connecting the optical digital cable to the DIGITAL (CD) OUT OPTICAL connector, take the cap off the connectors and push the cable plugs in until they click into place. Be careful not to bend or twist the optical cable. Optical digital cable (not supplied) Note Only the audio signals of conventional CDs can be output from the DIGITAL (CD) OUT OPTICAL connector. Those of the Super Audio CD cannot be output through the DIGITAL (CD) OUT OPTICAL connector. Connecting the AC power cord Connect the AC power cord to a wall outlet. To CD (SACD) IN (L/R) jacks Audio connecting cords (Red and White) (not supplied*) White (L) White (L) Red (R) Red (R) * If you do not make the ANALOG 5.1 CH connection (page 6), you can use the supplied audio connecting cable for the ANALOG 2CH connection. 8US