Sony SDM-HS75 Quick Setup Guide - Page 6
Displaying this, monitor's information, Problems caused by a computer or other - specifications
View all Sony SDM-HS75 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Symptom If OUT OF RANGE appears on the screen, If you are using Windows and replaced an old monitor with this monitor, Check these items x Problems caused by a computer or other equipment connected, and not caused by the monitor • Check that the video frequency range is within that specified for the monitor. If you replaced an old monitor with this monitor, reconnect the old monitor and adjust the computer's graphics board within the following ranges: Horizontal: 28-80 kHz Vertical: 48-75 Hz Resolution: 1280 × 1024 or less • If you replaced an old monitor with this monitor, reconnect the old monitor and do the following. Select "SONY" from the "Manufacturers" list and select "SDM-HS75" from the "Models" list in the Windows device selection screen. If the model name of this monitor does not appear in the "Models" list, try "Plug & Play." Displaying this monitor's information While the monitor is receiving a video signal, press and hold the MENU button for more than 5 seconds until the information box appears. Press the MENU button again to make the box disappear. MENU Although the safety standard registered model name of this unit is SDM-HS75/, the name of SDM-HS75 is used on sale and in this instruction manual. If any problem persists, call your authorized Sony dealer and give the following information: • Model name: SDM-HS75 • Serial number • Detailed description of the problem • Date of purchase • Name and specifications of your computer and graphics board Example INFORMATION 1 MODEL : SDM-HS75 SER . NO : 1234567 2 MANUFACTURED : 2004-52 3 1Model name 2Serial number 3Week and year of manufacture 6 (US)